Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Powder Flow Pro v1.2

    The Powder Flow Pro v1.2 is an updated version of Brookfield’s automated software used to control its powder flow tester (PFT). The PFT Powder provides quick and easy analysis of powder flow behavior in industrial processing equipment. The Powder Flow Pro v1.2. includes a new comparison...

  • WeighFlex DF Inline Weighing System

    The WeighFlex DF inline weighing system provides full control and measurement of dry material. The system weighs material when it flows through the device and across the WeighFlex chute into the next stage of your process. The WeighFlex feeder version has a clamshell gate beneath the inlet which...

  • CLM Classifier Mills

    The CLM series classifier mills are a combination of two stages of closed-circuit grinding and air classification all in one unit. Materials that are difficult to grind and those that require a finer grind and/or a narrower particle distribution curve than is practical to produce in a fine grinder...

  • Single and Dual Rotor Crushers

    Single and dual rotor crushers have been successfully applied to compliment pneumatic conveying and bulk handling system installations in the dairy, food, chemical, pharmaceutical, and agricultural industries. Many times an application’s product characteristics or process can change,...

  • Sanitary Lump Breaker with Side Removal Screens

    The model RDC1515-SS sanitary lump breaker features side removal bed screens for rapid, thorough wash down. Materials entering the 15-in. square inlet are reduced in size by dual rotors with three-point, single-piece, stainless steel breaking heads rotating with minimum clearance inside a curved,...

  • Triangular Blade Lump Breaker

    The Triskelion lump breaker is composed of a number of rotating triangular blades that intermesh with stationary blades. The triangular blades capture the input material, force it through the lump breaker, and roughly size the output into relatively uniform pieces of 3/4 in. or less by the spacing...

  • Vibro-Energy Grinding Mills

    These vibro-energy grinding mills are a versatile line of mills available for fast, low-cost particle size reduction to sub-micron range. Vibro-energy grinding action achieves higher output per input horsepower, and precise control of size and distribution. Product contamination from media and...

  • Powerful, Versatile Crusher

    The Delumper 1075 LP crusher reduces hard or soft, heat-sensitive, sticky, or wet agglomerates and lumps at high volume without degrading the material or causing rise in temperature. The unit’s low-friction cutting action is ideal for large quantities of sludge cake, agglomerated chemicals,...

  • CenterPoint Series Tank/Hopper Weighing Systems

    The new CenterPoint series tank/hopper scales utilize double-ended shear beam stainless steel load cells with center load design for optimum efficiency in mixing, blending, batching, inventory control, and general weighing. Manufactured entirely at Cardinal Scale’s factory in Webb City, MO,...

  • Group Manager Feeder Controller

    Designed for the management of up to 16 gravimetric screw feeders, weigh feeders, and mass flow meters, Schenck AccuRate introduces the Disocont Master Touch Group Controller to the North American marketplace. The Disocont  Master is well-suited for processes when multiple feeders are to be...

Pages