Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Airtight Clamp-Connect Duct

    US Tubing introduces a clamp-connect duct that is guaranteed to be 100% airtight under either positive or negative pressure. The system uses a v-shaped clamp that tightly compresses a gasket between two perfectly flat pipe ends, cutting installation times by up to 50%. The resulting airtight...

  • Stainless Steel Rotary Knife Cutter

    The new stainless steel rotary knife cutter model #4-SS cuts corn, spices, roots, grains, and other foods into controlled sizes gently, sharply, and accurately, with little or no fines or dust. The unit features a rotor assembly with five full-length knives that cut material against four stationary...

  • Gravity Flow Heavy-Duty Metal Detectors for Fine Powders

    Mettler Toledo Safeline Gravity FlowHD metal detection systems are designed for the inspection of free-falling products in vertical packaging applications. Models are available to inspect both dusty powdered products and granular products consisting of large particulates. All systems are...

  • Nut and Dried Fruit Sorter with Pixel Fusion

    Key Technology’s Pixel Fusion helps nut and dried fruit processors meet the most stringent requirements for product quality and purity. By providing a clear distinction between good product, shell, foreign material (FM), defects, and different color grades, Pixel Fusion improves the accuracy...

  • Tablet Tester

    Pharma Technology Inc. (PTI) has introduced a new standalone iSeries In-Process Control (IPC) tablet tester. Ideal for automated sampling and testing of tablets, the module offers premium analysis capabilities for weight, thickness, diameter, and hardness – all in a compact, OEB 3 containment...

  • Level Switches for Chemical, Food Challenges

    The Dynatrol CL-10 G Series level detectors operate with accurate and consistent results on problem applications that have a tendency to bridge and “pack-out.” They handle precipitated and fine, light-weight chemical powders with a bulk density as low as 1 lb/cu ft. They easily manage...

  • ASME Tank Fabrication

    Ross Engineering’s ASME tanks are custom built to serve a wide range of applications and processing requirements in virtually any industry. The pictured 5000-gal stainless steel tank is designed for full vacuum up to 10 psig internal pressure at 200ºF in accordance with ASME Code Section...

  • Explosion Pressure Relief

    Targo-Vent is an opening angle limiter developed especially for REMBE explosion panels that guides the pressure relief specifically into areas, in which there is no danger to the adjoining infrastructure. The Targo-Vent absorbs the enormous repulsive forces of the explosion energy and guides the...

  • Flow Metering System Controller

    There is more to a good weighing system than an accurate measuring method. The connected controller -- also known as the processing unit, electronic device, or measuring amplifier -- is a decisive factor for the powerful performance of the system. The REMBE EVA HE controller for the C-Lever flow...

  • Shear Beam Load Cells

    In process weighing the series 350 shear beam load cells are reliable, accurate, and easy to install. Furthermore, the industrial characteristics, fully out of stainless steel and hermetically sealed, make this type fit for any application. The measuring principle, the determination of shear,...

Pages