Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Metal-Detectable Gaskets and Grommets Introduced

    Bunting Magnetics Co. offers its new metal detectable gaskets and grommets, now available on equipment for food, powder, or bulk solid processing lines. “Today, processors of any consumable product are increasing their demands for improved product safety. And until now, gaskets and...

  • Screen Classifying Cutter Controls Size Ranges

    The new Magnum Model 72 screen classifying cutter reduces infeed products spanning a wider range of sizes, at approximately 75 percent higher rates than standard size models of equivalent length.      The cutter features an 18-in. overall diam rotor, versus the standard 10.5-in.-...

  • Static Grounding System

    The Earth-Rite Multipoint II is an cCSAus/ATEX/IECEx-certified static grounding system that enables customers actively monitor up to eight discrete items of equipment at risk of discharging electrostatic sparks into flammable or combustible dust atmospheres. Whereas multiple items of equipment used...

  • Low-Leakage, Heavy-Duty Rotary Valves/Airlocks

    Saving energy was the underlying factor for the development of a low-leakage rotary valve for pneumatic conveying of granular products. The newly-developed rotor is designed with expanded tips at the end of the rotor blades. Wider vanes result in lower air leakage. In combination with the special...

  • Gentle, Snack Food Batch Blending

    The Mk X 50-35/35s Rollo-Mixer was designed for extremely gentle, snack food batch blending. It can blend dried fruit or friable cracker bits and nuts uniformly in 80 seconds. This Rollo-Mixer was made with a detailed food-grade specification in polished steel. The rotary drum blender has 35 cu ft...

  • Powder Show Conference Features Top Experts

    The International Powder & Bulk Solids conference program is crafted with input from an advisory board full of industry experts. Designed for new and experienced processing professionals to learn the latest in safety, efficiency, and compliance, this flexible conference program provides in-...

  • Powder Show Set to Celebrate 40 Years

    The 2016 Powder & Bulk Solids Conference & Exhibition (Powder Show) marks the 40th anniversary of the inaugural Powder Show in 1976. The dry processing and bulk solids handling industry’s largest event has come a long way since then. “Jenike & Johanson was among the 60...

  • Magnetic Separator Uses New Surface Treatment Technique

    Goudsmit Magnetic Systems offers a magnetic separator built using a new surface treatment technique. The hygienic wet blasting process, developed in collaboration with TNO, reduces the surface roughness of the stainless steel (304/316) casing to Ra ≤0.6 µm. This greatly reduces adhesion (...

  • Increasing Rotary Valve Life by Decreasing Wear

    Rotary valves operate in the bulk solids material handling industry as airlocks and feeders simultaneously for facilitating continuous feeding into a differential pressure environment. They accomplish this by using rotating pockets inside a cast housing. In order to rotate freely, the rotor cannot...

  • Load Cell Junction Box with Fault Detection

    Penko Engineering introduces the SIGMA4 load cell junction box with fault detection. The system can detect if the load cells are all right or not. It automatically adjusts the calibration when a load cell or the weighing indicator has been changed. Most measuring and weighing systems, based on...

Pages