Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Valves, Gates, & Airlocks

  • Drop Through and Blow Through Rotary Airlock Valves

    February 21, 2013

    These rotary airlock valves are designed for sanitary pneumatic conveying systems operating within -15 in. Hg to +15 PSIG with 6- to 12-in.-capacity options. The standard nine-blade rotor positions two blades to always be in contact with the discharge side of the housing providing a superior seal....

    comment
  • Powder Blow Through Rotary Valves

    February 20, 2013

    Conveying of sticky powders was the underlying factor for the development of a blow through rotary valve. The valves are available for various differential pressure applications for 22 to 50 psi. Depending on the pressure, the open end rotor is equipped with 12 or 14 vanes with beveled rotor tips....

    comment
  • Valves, Gates, and Airlocks

    February 20, 2013

    Horizon Systems offers multiple rotary airlocks to meet a range of applications. The company’s Airlock Rebuild Program can rebuild old airlocks to look and run like new for 25% less than the cost of a new one. Diverter valves are available for all applications. Inline diverter valves redirect...

    comment
  • Vortex Adds Loading Spouts to Product Line

    February 19, 2013

    Vortex Loading Solutions announces the addition of dust-free loadout equipment to its current line of slide gates and diverter valves. Vortex will offer a product mix of retractable loading spouts, positioners, and loading spout filtration systems to load and convey dry bulk materials in various...

    comment
  • Three-Position Slide Diverter Valve

    February 19, 2013

    The three-position slide diverter valve features a sealing method that uses regulated compressed air, applied to the sealing rings. This results in an airtight seal between the inlet and outlet ports and allows the valve to can be used in either pressure or vacuum pneumatic conveying systems. This...

    comment
  • Tight-Tolerance Rotary Airlock Valves

    February 13, 2013

    Progressive Products offers a range of tight tolerance, high-quality, American-made airlock valves for pneumatic conveying systems. All of the valves feature heavy-duty cast iron construction, relieved 8-vane rotors, premium life bearings, maintenance-free seals, and purge-ready endplates. ...

    comment
  • Millington Appointed European Sales Manager at Vortex

    February 8, 2013

    Vortex announces a change in its European sales management structure in order to support its continued growth as a solution provider in components for bulk material handling. Laurence Millington has been appointed European sales manager. In his new position, Millington will be responsible for...

    comment
  • Titan Series TLD Diverter

    February 7, 2013

    The Titan Series TLD diverter is designed for use in gravity-flow applications where abrasive material is diverted from one source to either two or three destinations. Material handled with the TLD diverter can include aggregates, rock, glass cullet, sand, refractory mix, and clinker. It is...

    comment
  • Blow-Through Feeder/Airlock

    February 5, 2013

    The BT Series blow-through feeder/airlock is designed to ensure optimal bulk density and throughput of hard-to-convey materials such as fine powders and flakes that, in high-pressure pneumatic conveying applications, can easily over-aerate and reduce material feed efficiency. The BT Series design...

    comment
  • Series D Diverter Valves

    January 25, 2013

    Lorenz manufactures Diverter Valves for vacuum and dilute phase conveying systems, including 2-way, 3-way, and 4-way diverters that are available in sizes from 2 to 8 in. in a variety of configurations. A lightweight aluminum sealed housing and polished stainless steel blade provide durability and...

    comment

Pages