Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Pneumatic Conveying

  • Dense-Phase Pneumatic Conveying System

    November 15, 2010

    The Dense Flow System differs from many of its competitors with the absence of air boosters along the pipeline. The system is able to achieve equal or greater results in many instances without the use of boosters. Some of the advantages to not having boosters are lower air consumption, lower...

    comment
  • Pneumatic Line Magnets

    November 15, 2010

    IMI has improved the holding strength of its Rare Earth bullet magnet. The newly introduced stripper collar – used to wipe metal contamination from the magnet - eliminates the loss of holding value experienced by similar magnets that incorporate a cleaning sleeve that covers the entire...

    comment
  • Regenerative Blowers

    November 15, 2010

    These high-performance single- and dual-stage regenerative blowers are capable of producing airflows over 1500 SCFM, pressures up to 12.2 psig, and vacuum to 17 in. Hg. A full range of accessories is also available, including flow-control devices that will instantaneously reroute your air stream....

    comment
  • Manual Dumping Station for Pneumatic Conveyors

    November 15, 2010

    This manual dumping station for pneumatic conveying systems collects dust created during manual dumping of bulk materials from bags, drums, and other containers, reducing waste, eliminating the need to clean a remote dust collection site, and preventing contamination of product and plant. The...

    comment
  • Dense-Phase Pneumatic Conveying Systems

    November 15, 2010

    These systems handle a wide range of materials and bulk densities at rates from 500 lb/hr to 450 tn/hr, over distances to 6000 ft. Each system is custom-designed from one of 16 different conveying concepts to provide a conveying solution that fits the process. One conveying concept, the Full-Line...

    comment
  • Hybrid Pneumatic Conveyor

    August 24, 2010

    ECO Phase takes the best attributes of a semi-dense phase system and the continuous feed of a dilute-phase system. This hybrid pneumatic conveying system operates at efficient levels continuously, reducing horsepower requirements. The benefits are lower equipment and operating cost investment....

    comment
  • Dense-Phase Pneumatic Conveying Systems

    August 23, 2010

    These systems handle a wide range of materials and bulk densities at rates from 500 lb/hr to 450 tn/hr, over distances to 6000 ft. Each system is custom-designed from one of 16 different conveying concepts to provide a conveying solution that fits the process. One conveying concept, the Full-Line...

    comment
  • Pressure Dense-Phase Systems

    August 23, 2010

    Pressure dense-phase systems convey materials at a lower velocity, which minimizes friction and pressure drop. Typically used in a batch process and ideal for fragile powders and agglomerated materials, these systems can convey materials long distances, to multiple destinations, and at rates over...

    comment
  • Dust-Tight Conveyor

    August 23, 2010

    The patented Stinger conveyor works best on fine, cohesive products such as TIO2, pigments, carbon black, clays, and similar materials. The conveyor uses TransFlow technology to precisely control the conveying air and condition the product. TransFlow conditioning enables difficult-to-handle...

    comment
  • Pneumatic and Industrial Vacuum Components

    August 23, 2010

    Pneumatic and industrial vacuum components include: pipe and tube bends, straight pipe and tubing, extended wear bends, welded fabrications, flexible hose, installation components, quick-on and gripper couplings, cam and groove couplings, and the original Morris compression couplings. Morris...

    comment

Pages