Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Pneumatic Conveying

  • Dense-Phase Pneumatic Conveying System

    November 15, 2010

    The Dense Flow System differs from many of its competitors with the absence of air boosters along the pipeline. The system is able to achieve equal or greater results in many instances without the use of boosters. Some of the advantages to not having boosters are lower air consumption, lower...

    comment
  • Dense-Phase Pneumatic Conveying Systems

    November 15, 2010

    These systems handle a wide range of materials and bulk densities at rates from 500 lb/hr to 450 tn/hr, over distances to 6000 ft. Each system is custom-designed from one of 16 different conveying concepts to provide a conveying solution that fits the process. One conveying concept, the Full-Line...

    comment
  • Blower Packages

    November 15, 2010

    Both the bi-lobe (MG Series) and tri-lobe (ZG Series) blowers are rated for 15 psig pressure or 15 in. Hg vacuum, providing air flows up to 3950 cfm. The blowers feature integral-shaft ductile iron impellers, dual splash lubrication, oversized cylindrical roller bearings, piston ring air seals, lip...

    comment
  • Hybrid Pneumatic Conveyor

    August 24, 2010

    ECO Phase takes the best attributes of a semi-dense phase system and the continuous feed of a dilute-phase system. This hybrid pneumatic conveying system operates at efficient levels continuously, reducing horsepower requirements. The benefits are lower equipment and operating cost investment....

    comment
  • Pressure Dense-Phase Systems

    August 23, 2010

    Pressure dense-phase systems convey materials at a lower velocity, which minimizes friction and pressure drop. Typically used in a batch process and ideal for fragile powders and agglomerated materials, these systems can convey materials long distances, to multiple destinations, and at rates over...

    comment
  • Wye Line Diverter

    August 23, 2010

    The patented Quantum Series 4-Way Wye Line Diverter directs powder, pellets, or granules from one source to four destinations, or converges from four sources to one destination. It is engineered to handle dry bulk solids in pneumatic conveying systems with vacuum or positive pressures up to 15 psig...

    comment
  • Pneumatic and Industrial Vacuum Components

    August 23, 2010

    Pneumatic and industrial vacuum components include: pipe and tube bends, straight pipe and tubing, extended wear bends, welded fabrications, flexible hose, installation components, quick-on and gripper couplings, cam and groove couplings, and the original Morris compression couplings. Morris...

    comment
  • Dust-Tight Conveyor

    August 23, 2010

    The patented Stinger conveyor works best on fine, cohesive products such as TIO2, pigments, carbon black, clays, and similar materials. The conveyor uses TransFlow technology to precisely control the conveying air and condition the product. TransFlow conditioning enables difficult-to-handle...

    comment
  • Sanitary Vacuum Conveying Systems

    August 23, 2010

    These dense-phase systems are best suited for conveying large amounts of material short to medium distances. Materials are conveyed in a fluidized state, and at a low velocity, to minimize friction and pressure drop. These systems are ideal for friable and fragile agglomerated powders. Lean-phase...

    comment
  • Vacuum Pneumatic Conveyor

    August 23, 2010

    The MiniVac pneumatic conveyor’s tool-less, side-door filter access allows operators to easily and quickly wipe down the system and change out filters for batching and general maintenance. Not only does this increase the productivity of your operators and your process, it ensures the...

    comment

Pages