Pneumatic Conveying
-
Blower Packages
November 15, 2010Both the bi-lobe (MG Series) and tri-lobe (ZG Series) blowers are rated for 15 psig pressure or 15 in. Hg vacuum, providing air flows up to 3950 cfm. The blowers feature integral-shaft ductile iron impellers, dual splash lubrication, oversized cylindrical roller bearings, piston ring air seals, lip...
comment -
Dense-Phase Pneumatic Conveying Systems
November 15, 2010These systems handle a wide range of materials and bulk densities at rates from 500 lb/hr to 450 tn/hr, over distances to 6000 ft. Each system is custom-designed from one of 16 different conveying concepts to provide a conveying solution that fits the process. One conveying concept, the Full-Line...
comment -
Manual Dumping Station for Pneumatic Conveyors
November 15, 2010This manual dumping station for pneumatic conveying systems collects dust created during manual dumping of bulk materials from bags, drums, and other containers, reducing waste, eliminating the need to clean a remote dust collection site, and preventing contamination of product and plant. The...
comment -
Blower Packages
November 15, 2010This line of blower packages, including PneuPak, PneuMax, and now Qube, has been used as low-pressure air sources for many industrial applications —particularly pneumatic conveying. Qube 400, the newest addition to the line, includes a patent-pending noise reduction system on the Qx...
comment -
Dense-Phase Pneumatic Conveying System
November 15, 2010The Dense Flow System differs from many of its competitors with the absence of air boosters along the pipeline. The system is able to achieve equal or greater results in many instances without the use of boosters. Some of the advantages to not having boosters are lower air consumption, lower...
comment -
Hybrid Pneumatic Conveyor
August 24, 2010ECO Phase takes the best attributes of a semi-dense phase system and the continuous feed of a dilute-phase system. This hybrid pneumatic conveying system operates at efficient levels continuously, reducing horsepower requirements. The benefits are lower equipment and operating cost investment....
comment -
Wye Line Diverter
August 23, 2010The patented Quantum Series 4-Way Wye Line Diverter directs powder, pellets, or granules from one source to four destinations, or converges from four sources to one destination. It is engineered to handle dry bulk solids in pneumatic conveying systems with vacuum or positive pressures up to 15 psig...
comment -
Pneumatic and Industrial Vacuum Components
August 23, 2010Pneumatic and industrial vacuum components include: pipe and tube bends, straight pipe and tubing, extended wear bends, welded fabrications, flexible hose, installation components, quick-on and gripper couplings, cam and groove couplings, and the original Morris compression couplings. Morris...
comment -
Dust-Tight Conveyor
August 23, 2010The patented Stinger conveyor works best on fine, cohesive products such as TIO2, pigments, carbon black, clays, and similar materials. The conveyor uses TransFlow technology to precisely control the conveying air and condition the product. TransFlow conditioning enables difficult-to-handle...
comment -
Sanitary Vacuum Conveying Systems
August 23, 2010These dense-phase systems are best suited for conveying large amounts of material short to medium distances. Materials are conveyed in a fluidized state, and at a low velocity, to minimize friction and pressure drop. These systems are ideal for friable and fragile agglomerated powders. Lean-phase...
comment