Pneumatic Conveying
-
Dense-Phase, Gravity-Filled Pneumatic Conveyors
February 22, 2011The DPG-B Series gravity-loaded bottom-discharge dense-phase conveyors are ideal for moving powdered, granular, or pelletized friable and abrasive materials. They are rated up to 100+ tn/hr and provide high material-to-air ratios and extremely low line velocities, resulting in smaller line sizes,...
comment -
Bulk Bag Unloader for Pneumatic Conveyors
February 22, 2011The BFF Series (forklift load) bulk bag unloader has a non-flow-through pick-up adapter for multiple pneumatic conveying lines. The Tele-Tube telescoping tube raises a Spout-Lock clamp ring that seals the clean side of the bag spout to the clean side of the telescoping tube, exerting continual...
comment -
Mini Pneumatic Conveyor
February 22, 2011MiniVac integral regenerative blower technology reduces the need for plant air supply and reduces energy costs by up to 30 percent. It also reduces labor with tool-less, side-door access for filter changes and cleaning, and eliminates the need for separate dust collection with an internal filter...
comment -
Vacuum Conveyors
February 22, 2011These vacuum conveyors are ideal for long-distance conveying applications over torturous routes. The system is easy to route, has few moving parts, is dust tight in operation, and empties product leaving minimum residue. Typical throughput rates are up to 10 tn/hr, at distances of 330 ft that can...
comment -
Dense-Phase Pressure Pneumatic Conveying System
February 22, 2011Most degradation and wear occur primarily at the end of the conveying cycle, where the conveying velocities are always the highest. The HDP 4000 Full Line Concept system prevents the conveying line from purging or emptying at the end of the cycle by precisely controlling the supply air pressure and...
comment -
DoverMEI
comment -
Vac-U-Max Moves to New Facility
January 3, 2011Vac-U-Max, a pioneer since 1954 of the pneumatic conveying system and industrial vacuum cleaners, has completed a move to its new 71,000-sq-ft facility that includes a fully functional state-of-the-art 6000-sq-ft test and demonstration facility. The new facility at 69 Williams St. in Belleville...
comment -
Online Resource Simplifies Evaluation of Pneumatic Conveying Components, Assists Material Handling Professionals in Procurement Process
November 30, 2010The NBE Components & Accessories Resource is a secure, online tool specifically for professionals involved in the operation and maintenance of pneumatic conveying systems for dry bulk material. The Resource offers immediate access to more than 1750 SKUs in 60 product categories. Components,...
comment -
Regenerative Blowers
November 15, 2010These high-performance single- and dual-stage regenerative blowers are capable of producing airflows over 1500 SCFM, pressures up to 12.2 psig, and vacuum to 17 in. Hg. A full range of accessories is also available, including flow-control devices that will instantaneously reroute your air stream....
comment -
Pneumatic Line Magnets
November 15, 2010IMI has improved the holding strength of its Rare Earth bullet magnet. The newly introduced stripper collar – used to wipe metal contamination from the magnet - eliminates the loss of holding value experienced by similar magnets that incorporate a cleaning sleeve that covers the entire...
comment