Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology


  • Sub-Fractional AC Gearmotors and Reducers

    July 31, 2015

    Brother Gearmotors introduces a line of ie3 gearmotors that offers increased efficiency over standard IE1 models throughout the speed range and initiate less mechanical stress, which directly translates into long-term energy savings. The ie3 gearmotors run cooler and with less noise and, as they...

  • Ultrasonic Cleaner for Greener Cleaning

    July 24, 2015

    Ultrasonic LLC introduces the Ultra 2400FA, a full-featured ultrasonic cleaner with a 24-gal main tank capacity and horizontal transducers for superior cleaning action without solvents. These 120V or 220V models features an agitation table, dual filtration, a 6-gal weir tank, sparge bar, and...

  • Metal Detectable Silo Fluidizer

    July 23, 2015

    The new metal detectable fluidizer disk assures zero contamination of products for the dairy, pharmaceutical, and food-related industries. The fluidizer is particularly effective at preventing ratholing and bridging by utilizing air pressure to move the material while gently vibrating the vessel...

  • Plastic Static Dissipative Hose

    July 15, 2015

    This line of all-plastic static dissipative polyurethane hose features an embedded copper grounding wire and is now offered with new conductive PVC cuffs for complete static protection. FlexStat static dissipative hose is extruded from specially formulated clear polyurethane with an ABS helix...

  • Atlas Copco #1 in Newsweek Ranking

    July 14, 2015

    Atlas Copco was ranked 11th in the world and highest in the industrial sector by Newsweek Green Rankings, one of the world’s foremost corporate environmental rankings of the 500 largest publicly-traded, global companies by market capitalization.        ...

  • Inside the Bulk Solids Innovation Center - Full-Scale Test Lab

    July 7, 2015

    The full-scale test lab at the Kansas State University Bulk Solids Innovation Center is the heart of what the center is intended to provide for students and industry workers. Here students will be able to see the equipment in action and learn what the difference is between dense phase pneumatic...

  • Inside the Bulk Solids Innovation Center - First Floor

    July 7, 2015

    Besides the full scale test lab, there are other components to the first floor of the Kansas State University Bulk Solids Innovation Center. The first floor contains laboratory spaceand a blower room, while the outside features a silo and dust collector for the facility. Room...

  • Industrial Fans

    July 7, 2015

    Capture and control of emissions is accomplished by creating air movement. Every type of fan design can be used to move air through a filter or process scrubber. Occasionally the air is corrosive or contains abrasive particles and would require special construction to resist wear. The fan shown is...

  • Truck Blowers for Pneumatic Conveying

    June 30, 2015

    Tuthill truck blowers can handle a wide range of materials for pneumatic conveying including cement, powders, pebbles, sand, and granules. The blowers feature longer bearing life to tolerate higher torque without failing and extended seal life with a triple lip design. These truck blowers have a...

  • Atlas Copco Awarded Food Safety System Certification

    June 26, 2015

    Atlas Copco is the first compressor manufacturer to receive ISO 22000 certification by Lloyds Register for its production facility in Antwerp, Belgium, which manufactures state-of-the-art oil-free air compressors, blowers, and air treatment products.         In...