Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Rotocage Lump Breaker

    September 12, 2013

    The versatile Rotocage Lumpbreaker breaks lumps, chunks, slabs, and agglomerates, without creating fines or generating heat. With only one moving part, the Rotocage Lumpbreaker requires virtually no maintenance and uses low power to break up lumps. It can be supplied with an array of cage designs...

    comment
  • Shorty Shredder

    September 9, 2013

    The VAZ 1300 U-S Shorty features a shorter feed ram, providing it with a smaller footprint and allowing it to be retro-fitted in tight areas or to maximize utilization of space in new facility installations. Ram feed strokes are calibrated for maximum throughput efficiency. The VAZ 1300 U-S...

    comment
  • Attrition Mill Reduces Particles to 100 Mesh

    September 6, 2013

    The SK-24-MS attrition mill reduces friable and non-friable materials, including powder metals, grains, regrind, scrap products, and chemicals, including wet milling, producing particles within relatively narrow size ranges from 10 down to 100 mesh. The 24-in.-diam mill is equipped with an outer...

    comment
  • Vecoplan Launches New Company

    September 5, 2013

    Vecoplan Integrated Solutions (VIS) LLC has been formed to provide turnkey systems for residential and commercial single-stream recycling facilities, as well as retrofit upgrades to existing systems that are underperforming. The announcement comes from Ulrich Schulte, Vecoplan Management Board...

    comment
  • Versatile Grinding Mills

    September 5, 2013

    Sweco Vibro-Energy grinding mills are a versatile line of mills available for fast, low-cost particle size reduction to sub-micron range. Vibro-energy grinding action achieves higher output per input horsepower, as well as precise control of size and distribution. Product contamination from media...

    comment
  • Simpactor ARB Pin Mill

    September 4, 2013

    The Simpactor ARB can easily mill semi-abrasive materials from 1 to 3 Mohs: limestone, zeolite, recycled or natural gypsum, bauxite, clays, non-calcined ceramics, and high percentage silica trona. The Simpactor’s space-saving design has a small footprint, which is ideal for gravity-fed...

    comment
  • Union Process Builds C-60 Attritor for Fracking

    September 3, 2013

    Union Process, Inc., a global manufacturer of particle size reduction and dispersing equipment, as well as related services for a range of research and industrial applications, has manufactured a C-60 Attritor for continuous processing of proppants used in the growing fracking industry.  ...

    comment
  • Roll Crushers/Granulators

    August 28, 2013

    These high-capacity, high-efficiency granulators offer large throughput, pneumatic or mechanical roll pressure, simplified design, extended roll life, accurate product control, and positive roll alignment. The granulators are designed for gradual size reduction in one, two, or three stages per unit...

    comment
  • Delumper 1075 LP Crusher

    August 27, 2013

    The Delumper 1075 LP crusher reduces hard or soft, heat-sensitive, sticky, or wet agglomerates and lumps at high volume without degrading the material or causing rise in temperature. The unit’s low-friction cutting action is ideal for large quantities of sludge cake, agglomerated chemicals,...

    comment
  • Sturtevant Celebrating 130 Years

    August 26, 2013

    Sturtevant Inc., a family-owned manufacturer of material processing equipment including crushers, fine grinders, and air classifiers, is celebrating 130 years in business. Since 1883, Sturtevant has provided processing solutions to the chemical, pharmaceutical, food, and mineral powder...

    comment

Pages