Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Stainless Steel Material Master Half Frame Bulk Bag Discharger with Delumper

    May 1, 2012

    This unit features a Sure-Seal pneumatic spout clamping system that ensures dust-tight operation. The heavy-duty Flo-Master “breaker bar” massaging system promotes material flow into a 16-in-diam rotary delumper to feed downstream process. Product contact surfaces are electro-polished,...

  • Vibro-Energy Grinding Mills

    April 30, 2012

    Sweco Vibro-Energy grinding mills are a versatile line of mills for fast, low-cost particle size reduction to sub-micron range. Vibro-Energy grinding action achieves higher output per input horsepower, as well as precise control of size and distribution. Product contamination from media and lining...

  • What to Do about Lumps: Selecting Crushers and Lump Breakers

    April 24, 2012

    The objective of this article is to explain crushers/lump breakers, which break lumpy and hard to handle material to improve processing, while handling challenges of many materials. I will first discuss applications and benefits, including common crusher types, factors to consider when selecting a...

  • Roll Compactor Features up to 800 Tons of Separating Force

    April 23, 2012

    The Ludman roll compactor is designed to provide a low-cost, mechanical means to upgrade or convert undesirable fines by agglomeration into a salable granular product. The roll compactor is also used for the agglomeration of fines into flakes for pyroprocessing, increasing product bulk density, and...

  • Ten-Bar Fine Grinder

    April 20, 2012

    This new model of fine grinders is used for processing materials in explosive environments such as sugar grinding from (4 to 12X) with a single pass mill. This new mill is designed for explosion pressure shock resistance up to 10 bar (145 psi). Ideally, the mill is best suited for...

  • Chilsonator System for High Containment Roll Compaction Application

    April 19, 2012

    The Contained Chilsonator System (CCS 1025) is Fitzpatrick’s latest development in roll compaction and is designed to fully contain all product in its processing and receiving sections. This tightly sealed design allows for the optional Product Containment System (PCS) to be added at the...

  • Multi-Cage Mills

    April 18, 2012

    Stedman H Series multi-cage mills are available in 2-4- or 6-row designs and in four sizes up to 250 TPH. The design also includes air cannons, heaters, and hydraulic ram. The air cannons are mounted at the intake and discharge to help prevent build-up of wet sticky material, while the heaters are...

  • Flow-Smasher Crusher

    April 17, 2012

    The Model FSM1824 Flow-Smasher crusher is shown with polished 304SS internal surfaces, and has an 18 x 24 in. inlet and outlet, and is 12 in. face to face. The particle-sizer is available in sizes ranging from 12 x 12 in. to 48 x 48 in., with larger combined systems also available. Atlantic Coast...

  • Selecting the Right Mill for the Right Material

    April 10, 2012

    Milling is defined as the method of taking large particles and inducing particle breakage through mechanical means. Often engineers struggle with the selection of the proper mill for the specific material of interest.  The biggest challenge in effective milling is matching the breaking action...

  • LumpMaster Lump Reducer Produces Small, Uniform Product

    April 4, 2012

    The LumpMaster quickly reduces lumps and agglomerations, producing a small, more uniform product for further material handling applications. Heavy-duty, yet compact in design, the LumpMaster will fit into most processes. Two gear-driven, counter-rotating finger shafts and replaceable side combs are...