Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Bentle Retires After 45 Years with Stedman

    April 21, 2009

    After more than 45 years of service with Stedman, Victor Bentle is retiring. Bentle’s career at Stedman started in 1963, when he was hired as a draftsman. Shortly thereafter, he moved to the Parts Sales Department. In 1967, he was named manager of the Parts Department and continued in...

    comment
  • Size Reduction Focus - May 09

    April 21, 2009

    Horizontal Shaft Impactor The Grand Slam secondary horizontal shaft impactor now features two new product developments: a new grinding path and an apron adjustment system. This impactor series uses high-chrome metallurgy to increase the wear life of machine components, thereby reducing metal...

    comment
  • Choosing the Right Size Reduction Equipment

    April 20, 2009

    Thomas E. Warne Thomas E. Warne There are almost as many different methods of performing size reduction on materials as there are materials themselves. Consequently, choosing...

    comment
  • High-Capacity Crusher

    March 5, 2009

    The Delumper Twin-LP is a powerful, high-capacity crusher that can efficiently reduce lumps, chunks, and agglomerates without churning or over-grind. These precision crushers are provided with inlet openings from 28 to 50 in. long. The DC2840 Twin-LP features a one-piece stainless steel body with...

    comment
  • Powder Processing Mills

    March 5, 2009

    This full line of powder processing mills features coarse to ultra-fine grinding. The Kek Kibbler pre-breaker is designed to accept lumps up to 150 mm in diameter and reduce them to 2-3 mm within a narrow particle-size distribution and with minimal fines. The Kek cone mill, ideal for intermediate...

    comment
  • Lump Breakers

    March 5, 2009

    Two models of lump breakers are designed to reduce softer and abrasive products such as filter cakes, food stuffs, chemicals, fertilizers, and fly ash into sizes that can be further processed. Both models are available with motor and drive options, as well as various materials of construction (mild...

    comment
  • Air Classifying Mill

    March 5, 2009

    The Mikro ACM-e has been specifically designed for the carbon black industry. The enhanced model offers improved product quality and is cleaner and nearly grit-free compared to other air classifier mills. The new model is energy efficient, exhibiting low pressure drop, thus requiring less power...

    comment
  • Classifier Mill

    March 5, 2009

    This classifier mill offers the combination of two-stage closed-circuit grinding with inter-stage classification. It was developed to handle higher volume and very fine size reduction jobs, and it fine-grinds and classifies materials such as grain, sugar, spices, glazes, protein, gelatin, and cocoa...

    comment
  • Screen Classifying Cutter

    March 5, 2009

    The SCC-15 screen classifying cutter cuts hard, soft, and fibrous materials into controlled particle sizes from granules down to 20-30 mesh with minimal fines, at rates to 500 cu ft/hr. The patented helical rotor design with dozens of cutter heads attached to a helical array of staggered holders...

    comment
  • Limestone Grinding Attritor

    March 5, 2009

    This custom CL-200 attritor is part of a complete system used to grind limestone for the purpose of flue gas desulphurization. The system includes the limestone storage silo, gravimetric feeder, CL-200 attritor, mill product tank, hydrocyclone feed pumps, and hydrocyclone. The attritor is powered...

    comment

Pages