Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Pre-Breaker Mill

    June 9, 2009

    The Kek Kibbler pre-breaker mill is designed to work as a stand-alone mill or in conjunction with other Kek mills. Strong and robust, the unit is designed to demolish large lumps up to 150 mm and reduce them down to 2-3 mm in preparation for further processing. Size reduction takes place through a...

    comment
  • Centrifugal Impact Mill

    June 9, 2009

    This 24-in. dia. sanitary stainless steel centrifugal impact mill, or pin mill, for dry or wet bulk solids provides fine-to-coarse grinding of friable materials into controlled particle sizes down to 325 mesh, as well as lump breaking and conditioning of fibrous materials. High-speed rotation of...

    comment
  • Jet Pulverizer

    June 9, 2009

    The new 15-in. sanitary Micron-Master jet pulverizer offers processing capabilities into the commercial scale with a processing range of 50-400 PPH. The family of jet pulverizers is now available in 1-, 2-, 4-, 8-, 12-, and 15-in. sizes. Each is constructed of polished 316 stainless and furnished...

    comment
  • Hammer Mill

    June 9, 2009

    The Rigimill hammer mill is a rigid blade design mill that suits applications from lab use to full production. The unit can be used for grinding or finishing products from grains to cake mix. Mills are available in agricultural, chemical, or sanitary construction, and in 16- and 24-in. models,...

    comment
  • Hammer Mill

    June 9, 2009

    The Universal Mikro Pulverizer (UMP) has been designed to replace the Bantam as a versatile size reduction apparatus, with different configurations and model sizes available. The UMP features a fabricated housing with a hinged door and tri-clamp closure mechanism. It features interchangeable...

    comment
  • Horizontal Shaft Impactor

    June 9, 2009

    The Grand Slam secondary horizontal shaft impactor now features two new product developments: a new grinding path and apron adjustment system. This impactor series uses high-chrome metallurgy to increase the wear life of machine components, reducing metal replacement costs. Used for a wide variety...

    comment
  • Jet Pulverizer Meets Triosyn Particle-Size Reduction Requirements

    May 8, 2009

    The Jet Pulverizer Co. has developed a process solution to produce Triosyn powder with a 1.2 µm average particle size. In 2008, Triosyn Corp., located in Williston, VT, approached Jet Pulverizer to obtain Triosyn powder of particle size averaging at 1.5 µm. Triosyn Corp. is...

    comment
  • Classifier Mills

    May 5, 2009

    The CLM series of classifier mills is a combination of two stages of closed-circuit grinding and air classification all in one unit. These mills can be used to handle difficult-to-grind products and those products requiring a narrow particle distribution. Materials that are difficult to grind and...

    comment
  • Jet Pulverizer

    May 5, 2009

    The new 15-in. sanitary Micron-Master jet pulverizer offers processing capabilities into the commercial scale with a processing range of 50-400 PPH. The family of jet pulverizers is now available in 1-, 2-, 4-, 8-, 12-, and 15-in. sizes. Each is constructed of polished 316 stainless and furnished...

    comment
  • Bentle Retires After 45 Years with Stedman

    April 21, 2009

    After more than 45 years of service with Stedman, Victor Bentle is retiring. Bentle’s career at Stedman started in 1963, when he was hired as a draftsman. Shortly thereafter, he moved to the Parts Sales Department. In 1967, he was named manager of the Parts Department and continued in...

    comment

Pages