Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • High-Pressure Grinding Rolls

    June 9, 2010

    Koppern Equipment engineers HPGR systems where the density and thickness of the press discharge flake is determined by the design, size, and operating parameters of the roller press. This allows size reduction to application-specific requirements. The system exerts high pressure on the feed...

    comment
  • Jet Mill

    June 9, 2010

    The Micronizer jet mill is a spiral jet mill with no moving parts that grinds and classifies powders to low and sub-micron particle sizes in a single operation using high-pressure compressed air, gas, or steam. For processing ceramic powders, product contact parts can be made from aluminum oxide,...

    comment
  • Hammer Mill

    June 9, 2010

    This hammer mill reduces friable and fibrous materials into uniform particle sizes from 20 to 300 mesh. Centrifugal force causes pivoting hammers to stand at 90º to the rotating shaft, throwing material against breaker plate ridges in the feed section, and then against perforated bed screens...

    comment
  • Hammer Mills

    June 9, 2010

    The Eliminator line includes five designs, eight diameters, and 12 widths for the most complete ability to size individual equipment for customers’ specific capacity requirements. The EMF mill is capable of grinding to a finer particle size than the traditional hammer mill. The company...

    comment
  • Fine Grinder

    June 9, 2010

    The M-Series fine grinder can grind dry, free-flowing material as fine as 200 mesh (75 microns) with tight distribution of particle size. It is best suited for heat-sensitive materials such as resins, sugar, and powder coatings. Utilizing a high-speed impact principle, the feed material is metered...

    comment
  • Pre-Breaker Mill

    June 9, 2010

    The Kek Kibbler pre-breaker mill is designed to work in conjunction with other Kek mills or as a stand-alone mill. Strong and robust, the Kibbler is designed to demolish large lumps up to 150mm and reduce them down to 2-3mm in preparation for further processing. Size reduction takes place through a...

    comment
  • Lump Breaker

    June 9, 2010

    The Delumper 2085L crusher breaks up lumps, crushes minerals, improves product consistency, facilitates mixing, drying, and conveying, and keeps process lines running smoothly. This powerful lump breaker reduces a wide range of materials including chemicals, sugar, food, mineral, salts, plastics,...

    comment
  • NETZSCH Fine Particle Technologies Acquires Premier Mill

    May 7, 2010

    NETZSCH Fine Particle Technology LLC and SPX Corp. signed a definitive agreement on April 30, 2010 under which NETZSCH acquired the Premier Mill business of SPX Corp. Premier Mill manufactures grinding and dispersing equipment. As of May 3, 2010, the combined products and services of NETZSCH and...

    comment
  • Union Process Expands Presence in China

    April 28, 2010

    Union Process Inc., a manufacturer of size reduction and dispersing equipment for a broad range of industrial applications, has moved its China operation into a larger facility. Dr. Andrew Szegvari founded Union Process in Akron, OH, in 1946. Today, the Akron facility not only houses the...

    comment
  • Air Products Advances Cryogenic Grinding Capabilities through Licensing Agreement for Fine Grinding System

    April 28, 2010

    Air Products, a recognized leader in cryogenic grinding, has expanded its portfolio of size reduction offerings with the addition of an ultra-fine grinding mill. This patented mill is capable of processing materials at throughputs ranging from just a few kg/hr to over 1000 kg/hr. Licensed from...

    comment

Pages