Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Sanitary Lump Breaker with Side-Removal Screens

    March 8, 2011

    The model RDC1515-SS sanitary lump breaker features side-removal bed screens for rapid, thorough wash down. Materials entering the 15-in. square inlet are reduced in size by dual rotors with three-point, single-piece, stainless steel breaking heads rotating with minimum clearance inside a curved,...

    comment
  • Pin Mill

    March 8, 2011

    Operators can process oversize sugar to fine granular or de-agglomerate granulated sugar with a low-maintenance Simpactor pin mill. The unit is a centrifugal, pin-type impact mill that reduces low-to-medium-density materials to uniform fine particle sizes of 50-200 mesh. Feed is dropped onto the...

    comment
  • Continuous Processing Attritor

    March 8, 2011

    The C Series continuous attritor is a "work-horse" machine that uses 1/8- 3/8-in. grinding media. The C-20 is designed for applications that require continuous production of large quantities of material. It is a low-maintenance, high- efficiency mill designed for processing...

    comment
  • Hammer Mill

    March 8, 2011

    The Model 4260 (42 x 60 in.) hammer mill features a two-stage reduction principle with a rain of hammer or ring blows that shatter and disintegrate the material. The materials are shattered two ways before passing through the grinding plate, 1) upon entry by the revolving hammers and 2)...

    comment
  • Air-Swept Pulverizer/Classifier

    March 8, 2011

    Versatility, energy savings, and one-step processing are key features of the Pulvocron. This air-swept pulverizer/classifier dries and grinds wet cakes, pastes, slurries, and produces free-flowing powders. It can also be used to dry non-aqueous volatiles. The unit is best suited for applications...

    comment
  • Triangular Blade Lump Breaker

    March 8, 2011

    The Triskelion lump breaker is composed of a number of rotating triangular blades that intermesh with stationary blades. The triangular blades capture the input material, force it through the lump breaker, and roughly size the output into relatively uniform pieces of 3/4 in. or less by the spacing...

    comment
  • Fluid Energy Processing & Equipment Co.

    comment
  • Pallmann Doubles Orders

    February 22, 2011

    Size reduction technology specialist Pallmann Group reports strong growth for 2010. Incoming and booked orders were twice the level of 2009, and incoming orders were even up by around ten percent over 2008, the company’s previous record year. The company has laid a solid foundation for...

    comment
  • American Pulverizer Co.

    comment
  • Ludman Industries

    comment

Pages