Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Hapman

    comment
  • Dry and Wet Micronization Webinar Announced

    March 9, 2011

    Hard minerals such as quartz feldspar and zircon sand are widely used in the glass, ceramic, and porcelain industry. It is always a challenge not to increase the Fe2O3 content during processing. Highly wear-protected machines, in order to avoid any increase of the Fe2O3 content, must be employed...

    comment
  • Powder Technologies Inc.

    comment
  • Nisshin Engineering Inc.

  • L.B. Bohle LLC

  • Pin Mill

    March 8, 2011

    Operators can process oversize sugar to fine granular or de-agglomerate granulated sugar with a low-maintenance Simpactor pin mill. The unit is a centrifugal, pin-type impact mill that reduces low-to-medium-density materials to uniform fine particle sizes of 50-200 mesh. Feed is dropped onto the...

    comment
  • High-Capacity Crusher

    March 8, 2011

    The Delumper 2020LP is a powerful, high-capacity crusher that easily reduces large volumes of wet, dry, sticky, hard, and soft agglomerates and lumps to a free-flow condition. The unit’s efficient low-friction cutting action is excellent for processing large quantities of chemicals, fats,...

    comment
  • Air-Swept Pulverizer/Classifier

    March 8, 2011

    Versatility, energy savings, and one-step processing are key features of the Pulvocron. This air-swept pulverizer/classifier dries and grinds wet cakes, pastes, slurries, and produces free-flowing powders. It can also be used to dry non-aqueous volatiles. The unit is best suited for applications...

    comment
  • Continuous Processing Attritor

    March 8, 2011

    The C Series continuous attritor is a "work-horse" machine that uses 1/8- 3/8-in. grinding media. The C-20 is designed for applications that require continuous production of large quantities of material. It is a low-maintenance, high- efficiency mill designed for processing...

    comment
  • Sanitary Lump Breaker with Side-Removal Screens

    March 8, 2011

    The model RDC1515-SS sanitary lump breaker features side-removal bed screens for rapid, thorough wash down. Materials entering the 15-in. square inlet are reduced in size by dual rotors with three-point, single-piece, stainless steel breaking heads rotating with minimum clearance inside a curved,...

    comment

Pages