Size Reduction
-
Hammer Mill
June 9, 2009The Universal Mikro Pulverizer (UMP) has been designed to replace the Bantam as a versatile size reduction apparatus, with different configurations and model sizes available. The UMP features a fabricated housing with a hinged door and tri-clamp closure mechanism. It features interchangeable...
comment -
Pre-Breaker Mill
June 9, 2009The Kek Kibbler pre-breaker mill is designed to work as a stand-alone mill or in conjunction with other Kek mills. Strong and robust, the unit is designed to demolish large lumps up to 150 mm and reduce them down to 2-3 mm in preparation for further processing. Size reduction takes place through a...
comment -
Centrifugal Impact Mill
June 9, 2009This 24-in. dia. sanitary stainless steel centrifugal impact mill, or pin mill, for dry or wet bulk solids provides fine-to-coarse grinding of friable materials into controlled particle sizes down to 325 mesh, as well as lump breaking and conditioning of fibrous materials. High-speed rotation of...
comment -
Jet Pulverizer
June 9, 2009The new 15-in. sanitary Micron-Master jet pulverizer offers processing capabilities into the commercial scale with a processing range of 50-400 PPH. The family of jet pulverizers is now available in 1-, 2-, 4-, 8-, 12-, and 15-in. sizes. Each is constructed of polished 316 stainless and furnished...
comment -
Hammer Mill
June 9, 2009The Rigimill hammer mill is a rigid blade design mill that suits applications from lab use to full production. The unit can be used for grinding or finishing products from grains to cake mix. Mills are available in agricultural, chemical, or sanitary construction, and in 16- and 24-in. models,...
comment -
Jet Pulverizer Meets Triosyn Particle-Size Reduction Requirements
May 8, 2009The Jet Pulverizer Co. has developed a process solution to produce Triosyn powder with a 1.2 µm average particle size. In 2008, Triosyn Corp., located in Williston, VT, approached Jet Pulverizer to obtain Triosyn powder of particle size averaging at 1.5 µm. Triosyn Corp. is...
comment -
Jet Pulverizer
May 5, 2009The new 15-in. sanitary Micron-Master jet pulverizer offers processing capabilities into the commercial scale with a processing range of 50-400 PPH. The family of jet pulverizers is now available in 1-, 2-, 4-, 8-, 12-, and 15-in. sizes. Each is constructed of polished 316 stainless and furnished...
comment -
Classifier Mills
May 5, 2009The CLM series of classifier mills is a combination of two stages of closed-circuit grinding and air classification all in one unit. These mills can be used to handle difficult-to-grind products and those products requiring a narrow particle distribution. Materials that are difficult to grind and...
comment -
Size Reduction Focus - May 09
April 21, 2009Horizontal Shaft Impactor The Grand Slam secondary horizontal shaft impactor now features two new product developments: a new grinding path and an apron adjustment system. This impactor series uses high-chrome metallurgy to increase the wear life of machine components, thereby reducing metal...
comment -
Bentle Retires After 45 Years with Stedman
April 21, 2009After more than 45 years of service with Stedman, Victor Bentle is retiring. Bentle’s career at Stedman started in 1963, when he was hired as a draftsman. Shortly thereafter, he moved to the Parts Sales Department. In 1967, he was named manager of the Parts Department and continued in...
comment