Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • Vecoplan Appoints Bill Davison Vice President Operations

    February 5, 2013

    William (Bill) Davison has been promoted to vice president operations at Vecoplan LLC, a worldwide leader in shredding, recycling, and processing technologies for the production of alternative energy from both waste and biomass. Responsibilities of his new position include overseeing all aspects of...

    comment
  • Fitzpatrick Appointed Exclusive Distributor of Patented Powder Milling Technology

    February 5, 2013

    International Innovative Technologies Ltd (IIT), the UK-based manufacturer of patented milling and fine grinding technology, has appointed The Fitzpatrick Co., a business unit of IDEX Corp., as its exclusive distributor for the Americas. In an agreement covering the U.S., Canada, and Central...

    comment
  • Joint Malvern, IIT Webinar to Explore Latest Technology for Energy-Efficient Milling

    February 1, 2013

    Those interested in learning about the latest technology for energy-efficient milling are invited to attend a free webinar on February 27, 2013, presented jointly by Malvern Instruments and International Innovative Technologies (IIT), a UK-based provider of milling solutions. The webinar,...

    comment
  • Taskmaster 1600 Heavy Solids Shredder

    February 1, 2013

    The Taskmaster TM 1600 is a powerful twin-shaft shredder that reduces a wide variety of tough solids. Typical applications include containers, plastics, packaging, wood, paper, rejects and returns, and more. Bulk volume is reduced up to 80%, significantly eliminating storage or disposal costs and...

    comment
  • Netzsch Introduces New Product Trial Machine

    January 28, 2013

    Netzsch Premier Technologies LLC recently commissioned a new CGS-10 pilot plant in its Technical Center in Exton, PA. The Netzsch Condux CGS-10 is manufactured for contamination free dry grinding of material of any hardness using air jet milling of small batches on a laboratory scale. The...

    comment
  • Jet Milling with Steam

    January 24, 2013

    The successful start of the new s-JET process developed by Netzsch-Condux Mahltechnik has now produced a further addition to the existing program of this new technology. A compact laboratory-steam jet mill plant was developed for laboratory use and/or for small charges. The compactly assembled s-...

    comment
  • Bepex Angle Disintegrator Processes, Delumps Dry Powders for Food Ingredient Supplier

    January 17, 2013

    A large food ingredient supplier was looking for a way to process dry ingredients for use as a food ingredient and flavoring. In addition to delumping agglomerates, the company also wanted to include additional ingredients to assure a homogeneous mix.     The company looked to...

    comment
  • Open Manifold Micronizer Jet Mill

    January 16, 2013

    This mill pulverizes ceramic powders, as well as chemicals, pigments, cosmetics, and minerals to narrow fine particle size distributions with no moving parts. The Open Manifold Micronizer grinds and classifies powders to low and sub-micron particle sizes in a single operation using high-pressure...

    comment
  • Roll Crusher/Granulator

    January 15, 2013

    The Ludman roll crusher or granulator is a widely used size reduction unit that can successfully process a variety of materials. The differential speed of smooth or corrugated rolls permits the production of a narrow range of particle sizes with a minimum of objectionable oversize and undersize...

    comment
  • Custom Size Reduction Systems

    January 11, 2013

    Meeting particulate size requirements can be difficult, and expert advice will pay big dividends in improving process efficiency and end product quality. Powder Process-Solutions can design a turnkey size reduction and milling system, or integrated system, to meet your challenging needs. PPS...

    comment

Pages