Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • CLM Series Classifier Mills

    March 14, 2013

    The CLM series of classifier mills is a combination of two stages of closed circuit grinding and air classification all in one unit. Materials that are difficult to grind and those that require a finer grind and/or a narrower particle distribution curve than is practical to produce in a fine...

    comment
  • Sanitary Attrition

    March 13, 2013

    The Model SK-30-SS sanitary attrition mill produces particles within a relatively narrow size range of 10 to 100 mesh. The unit is particularly suited for the reduction of fibrous and friable materials, and cracking of grains. It is equipped with an outer stationary milling disc, and an inner...

    comment
  • Crushers and Mills

    March 4, 2013

    Machine and Process Design crushers, granulators, and mills have been used to solve processing challenges in the food, chemical, pharmaceutical, dairy, and agricultural industries. Many times the process or product characteristics can change, resulting in material that needs to be crushed or ground...

    comment
  • Vecoplan Promotes Jason Schultz to Client Support Manager

    February 28, 2013

    Vecoplan LLC, a worldwide leader in size reduction technologies, has promoted Jason Schultz to the position of client support manager. In his new position, Schultz is the go-to-guy for all things service. Responsibilities of his new position include providing troubleshooting service, to...

    comment
  • Roll Crusher/Granulator

    February 28, 2013

    The Ludman roll crusher or granulator is a size reduction unit that can successfully process a variety of materials. The differential speed of smooth or corrugated rolls permits the production of a narrow range of particle sizes with a minimum of objectionable oversize and undersize particles. The...

    comment
  • Pharma-Master USDA-Accepted Jet Mill

    February 28, 2013

    The Pharma-Master USDA-accepted jet mill is an enhanced version of the Micron-Master that is specifically designed to comply with the USDA standards. It is 3D CAD designed to assure refined assembly, and features enhanced ease of use, surface finish, and cleanability. Product contact surfaces and...

    comment
  • Yale Mechanical

    comment
  • Mike Maloy Joins Vecoplan LLC

    February 19, 2013

    Mike Maloy has joined the staff of Vecoplan LLC as a project engineer. Vecoplan is a worldwide leader in the design and manufacture of shredding, recycling, and processing systems for the production of alternative energy from both waste and biomass. Maloy earned a Bachelor’s of Science...

    comment
  • Size Reduction for Pneumatic Conveying

    February 13, 2013

    Single- and dual-rotor crushers have been successfully applied to compliment pneumatic conveying and bulk handling system installations in the dairy, food, chemical, pharmaceutical and agricultural industries. Many times an application’s product characteristics or process can change,...

    comment
  • Rotary Scalpel

    February 6, 2013

    The Rotary Scalpel is a metering device that provides processors with a new level of batching and/or filling accuracy by combining a unique rotary drum design with a pneumatic scalpel. A fundamental design feature of the Rotary Scalpel is to functionally decouple the inlet design from the discharge...

    comment

Pages