Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Packaging & Bagging

  • Pinch-Bottom Bag Closer

    July 2, 2013

    Stonepak has developed the Model 90-JS pinch-bottom bag closer that efficiently closes the open top of filled pinch-bottom open-mouth woven polypropylene bags. This closer can also run standard Kraft multiwall PBOM bags. It activates the pre-applied hot melt adhesive, folds the top flap against the...

  • Vacuum Filling Machines

    July 1, 2013

    TMT vacuum fillers provide a solution for difficult-to-bag products, including fumed silica, carbon black, stearates, paint pigment, micro-polymers, and fibers. The advantages of these vacuum filling machines include consistent and close weight tolerances, virtually no residual dust from the...

  • Material Master Bulk Bag Material Conditioner

    June 27, 2013

    Discharging bulk bags containing material that has solidified, hardened, or agglomerated, can cause serious operational bottlenecks. Conditioning and emptying bulk bags can be dangerous if the proper equipment is not utilized. The patented system utilizes hydraulically actuated, heavy-wall tubular...

  • Sanitary Bulk Bag Filling Solutions

    June 26, 2013

    PPS bulk bag fillers combine precision weighing capabilities with flexible designs to deliver a cost-effective, accurate, and sanitary solution. Custom designs offer flexibility to achieve optimal performance and to accommodate any type of dry powder product. Manual and automated designs are...

  • EC-201 Robotic Palletizer

    June 25, 2013

    American-Newlong’s EC-201 robotic palletizer has a payload capacity of 440 lb, and a palletizing capacity of 1600 cycles/hr. The EC-201 palletizes bags, cases, pails, and other products. It also has four axes for maximum flexibility. The weight of the mechanically balanced arm can be...

  • Bulk Bag Filler Hang Weighing System

    June 24, 2013

    The Cone Table Elite (CTE) Bulk Bag Filler features Control and Metering's cone table densification system. The cone table provides maximum product densification that ensures bag stability. It also means that you can put more material into your current bulk bag or use a smaller bulk bag for a...

  • Bagging Systems

    June 20, 2013

    Chantland MHS engineers and manufactures bagging systems for long-term reliability under a wide range of operating conditions placing gusseted and non gusseted poly, woven-laminated poly and paper open mouth and valve bags. The robotic valve bag placers shown are set up to place bags on two filling...

  • Bulk Bag Filling System with Metal Detection

    June 19, 2013

    This mobile bulk bag filling system features an integral metal detector/separator and a tilt-down conveyor/feeder for dust-free filling at multiple locations. A patented Twin-Centerpost bulk bag filler detects metal in the free-fall stream of material entering the filler and then ejects it. The...

  • Low-Clearance Bulk Bag Unloader for Low Ceilings

    June 18, 2013

    Hapman’s new Low-Clearance Bulk Bag Unloader is engineered to operate in low-ceiling facilities where standard unloaders won’t fit or are difficult to use. Wherever a forklift has trouble maneuvering against a ceiling for bag change outs, the Low-Clearance Bulk Bag Unloader can be...

  • Powder/Bulk Solids Launches Powder Perspectives

    June 13, 2013

    Powder/Bulk Solids has launched "Powder Perspectives" -- an online column that will be hosted by Joe Marinelli, and include discussions concentrating on handling powders and other bulk solids. "Powder Perspectives" can be found on PowderBulkSolids.com under the Resources tab on...