Packaging & Bagging
-
2008 TAPPI PLACE Conference Focuses on Innovations in Flexible Consumer Packaging
July 15, 2008“Innovations in Flexible Consumer Packaging” is the focus of the 2008 TAPPI PLACE (Polymers, Laminations, Adhesives, Coatings and Extrusions) Conference, which will be held September 14-17 in Portsmouth, Virginia. The updated program schedule features more than 65 sessions that will...
comment -
Valve Bag Fillers
July 8, 2008Model 2010 Plug Stack Air Packer valve bag fillers are designed for high bagging rates of dry abrasive products that would cause excessive wear to in-feed valves of other filler designs. These are single spout units that can be installed side by side for two-, three-, and four-spout applications....
comment -
Bulk Bag Loaders and Unloaders
June 23, 2008This company manufactures safe, efficient, dust-free bag-loading and -unloading stations for small to large capacities. Three unloader models are available: the Model BDS with air-vibrator-shaker grate, the economical Model MTU with 2500- to 4000-lb capacity, and the heavy-duty Model BBU unloader...
comment -
Bulk Bag Filler
June 23, 2008The BagPak AD automatic-ejection bulk bagger filler has been redesigned to accommodate the new palletless bag designs. This unit incorporates simple air bladders to lift the heavy-duty mesh conveyor and drive the full bag to the accumulation conveyor. Densification is accomplished via the same air...
comment -
Bag Filling and Closing
June 23, 2008Technipes FUTURA filling and closing lines are designed for the fully automated packing of all product types into paper, poly, or poly-woven open-mouth bags. FUTURA fill heads may be gross or net weight in configuration, with one or multiple types of product-feed systems. The closing lines may be...
comment -
High-Speed Overhead Product Orienter
June 23, 2008This high-speed overhead orienter accepts product for palletizing and turns it 90, 180, or 270 degrees to automatically form the optimal pallet configuration for each product. The orienter can turn bags to form pallets with “butts out” bag orientation, and rotate cases and trays for...
comment -
Internally Baffled FIBC
June 23, 2008The Clean Seal MaxSack container is an internally baffled FIBC with a spread-strap lift-loop design. The technology produces a smooth, clean edge that helps eliminate product-packaging contamination. The unique double-coated baffle fabrication prevents product contamination caused by unraveling...
comment -
Bag Dump Stations
June 23, 2008Ensure clean and safe unloading of bagged, dry bulk solids with this bag-dump station. The dumping stations collect dust generated when dumping powdered, granular, or pelletized materials from bags, boxes, drums, and other containers, and then return the material to the hopper. The system reduces...
comment -
Palletizer Systems
June 23, 2008Robots provide high-speed palletizing capabilities and precise product placement in compact layout areas using minimal power consumption. An exclusive touch screen interface allows the operator to quickly and easily input bag, stack, and pallet data, and a program automatically determines precise...
comment -
Bulk Bag Discharger with Load Cells
June 23, 2008This bulk bag discharger can be programmed for batch or continuous operation directly from the bulk bag while reducing human involvement, providing safe and efficient operation. For consistency, the entire system is mounted on load cells to accurately resolve product batch weights to ±0.5%...
comment