Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mixers & Blenders

  • Pneumatic Blending Systems

    June 17, 2013

    Nol-Tec’s pneumatic blending systems provide quick, high-quality blending for uniform batches. Wear-resistant aerators inject gentle pulses of compressed air into a hopper cone, lifting materials upward and outward for a thorough blend. The operator controls the mix through adjustments of air...

    comment
  • Vibra Continuous Blender

    June 17, 2013

    The Vibra blender utilizes a combination of a rotating paddle and material fluidization to blend dry solids with the ease of liquids. Gentle controlled vibration of the mixing trough fluidizes ingredients on entry where a cut and fold mixing rotor provides agitation. Material flows through the...

    comment
  • MAP Laboratory Mixers

    June 17, 2013

    The small-scale production MLH mixer series has been re-engineered and modernized according to costumer’s requirements. The result is a new generation of laboratory mixers that offers improved features and ergonomics. The MLH consists of a stand-alone drive unit with incorporated frequency...

    comment
  • Sanitary Rotary Batch Mixer Blends Ingredients

    June 17, 2013

    Munson’s 700-TH-40-SS sanitary rotary batch mixer gently blends batches of ingredients in parts down to one per million with 100% uniformity in less than three minutes (regardless of disparities in the bulk densities, particle sizes, or flow characteristics of batch ingredients) and fully...

    comment
  • Ross Ribbon Blenders

    June 14, 2013

    Ross Model 42B ribbon blenders are used for straightforward blending of powders or other solid raw materials with a bulk density of 35 lb/cu ft or less. The following features are standard: stainless steel wetted parts polished to 60-grit finish; solid-shaft double ribbon agitator designed for...

    comment
  • Tumbling Drums for Continuous or Batch Processing

    June 13, 2013

    These tumbling drums can be designed for continuous or batch processing where gentle mixing of friable products, such as trail mixes and seasoning mixes, is required. The tumbling drums are frequently used to distribute dry coatings and additives on products such as pet food, breakfast cereal, or...

    comment
  • Fast Homogeneous Mixing

    June 12, 2013

    The Bella XN double-shafted fluidized zone mixer includes access doors that not only increase accessibility, but also make it easier to clean when necessary. The Bella mixer consists of twin drums that have two counter-rotating agitators with specifically angled paddles. They overlap at the center...

    comment
  • Vertical Cone Blender

    June 11, 2013

    This vertical cone blender easily handles all types of materials, including powders, solids, pellets, and grains, to deliver quick and precise mixing of batches in a single vessel with no segregation during discharge. Available in either a central shaft or orbiting arm configuration, these designs...

    comment
  • Large Rotary Drum Rollo-Mixer

    June 10, 2013

    The large rotary drum batch Mk VII 101-533/45 Rollo-Mixer is designed to uniformly blend over 24,000 lb of plastic pellets in three minutes, and has the flexibility to also blend 2400-lb batches. Made of carbon steel construction, the batch mixer has 533 cu ft of working load volume, a touch...

    comment
  • 3A-Sanitary-Certified Mixing & Blending Equipment

    June 7, 2013

    Marion Mixers designs and manufactures 3A-Sanitary-certified mixing and blending equipment that meet sanitation and hygiene requirements. All product content areas can be trusted to be safe and capable of achieving high levels of cleanliness. From easily removable components such as safety grates,...

    comment

Pages