Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mixers & Blenders

  • Mixer for Ice Cream

    May 31, 2012

    In the manufacturing process of ice cream, flavors, sugar, or sugar supplements in powder form get added into milk or water and are cooled below the freezing point. These flavors, stabilizers, thickeners, and sweeteners are often a powder mix and created on a high-intensive mixer/blender. Sometimes...

  • Automated Bulk Material Mixing System

    May 30, 2012

    Designed specifically for fully automated introduction, transfer, mixing, and blending of multiple, sluggish materials, this integrated mixing system produces such homogenous blends that downstream production scrap is virtually eliminated. An NBE lift-and-seal gaylord discharge system, with a dust-...

  • Mixers & Blenders with Easy-Clean Cantilever Shaft

    May 29, 2012

    Kemutec offers a full range of Gardner mixers and blenders featuring the Easy-Clean cantilever shaft. The cantilever design agitator shaft eliminates one set of bearings and seals at the non-drive end of the shaft. This, along with the full diameter hinged and safety interlocked door improves...

  • Wet Agglomeration System

    May 25, 2012

    The Schugi Flex-O-Mix is specifically designed to avoid the material buildup that often occurs when forming large particles from fine powders. A continuously deforming mixing chamber keeps wetted particles from adhering to equipment walls. This action prevents clogging and yields a more uniform...

  • Batch Blender

    May 24, 2012

    PCC offers the final addition to its Guardian Series 2 family - the 1-kg batch blender. Featuring cutting edge design and engineering, this all stainless steel blender features easy clean-out and material changes, high accuracy, and is available with up to four elements and up to 350 PPH. Process...

  • ComDisc Mixing System

    May 23, 2012

    ComDisc is a new system that provides a carry out of mixing goods up to 99.997% and more. The lower mixer arm is fitted with one or more wings. During mixing, the system moves into the shadow of the flow and turns to the rear. As the filling level decreases, the ComDisc elements turn in the...

  • All-in-One Mixer/Discharger

    May 22, 2012

    The silo discharger ensures a smooth discharge of dry products, while also mixing the product to ensure a consistent blend. The unloader rotates within the container bottom to prevent non-flowing materials from jamming, bridging, compacting, or segregating often seen by vibration or fluidization...

  • Ross Completes Large High-Speed Disperser Order

    May 21, 2012

    Ross has completed a large order of 51 high-speed dispersers for installation at two facilities of a multinational company. The high-speed dispersers included in the order are suitable for different size batches up to 75 gallons and equipped with 2 to 7.5 HP motors. All are floor-mounted mixers...

  • Microwave Mixer Heating System

    May 21, 2012

    Marion Mixers has partnered with AMTek Microwave to design and manufacture microwave vessel heating systems for the processing industries. This combination of a microwave and a mixer in one vessel solves a difficult microwave challenge: the ability to achieve uniform heat distribution. Other...

  • Powder Induction & Dispersion System

    May 18, 2012

    Processors can now add dry ingredients to mix vessels in a more ergonomic fashion, reducing operator injuries. Admix offers a range of products for consistent powder delivery even as viscosity and solids levels increase, insuring that your system will never plug or foul. Deliver powder inline at...