Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mixers & Blenders

  • Sanitary Rotary Continuous Mixer

    January 27, 2009

    This mixer blends bulk ingredients in ratios as extreme as one part per million with 100% uniformity regardless of disparities in the bulk densities, particle sizes, or flow characteristics of ingredients. Capacity ranges from 85 cu ft/hr at 1-min. residence time to 42 cu ft/hr at 2-min. residence...

    comment
  • Pneumatic Blending Systems

    January 27, 2009

    Pneumatic blending is one of the quickest, cleanest, and most efficient methods to obtain homogenous batches of powdered, granular, or abrasive materials in transporters, atmospheric bins, or storage silos. These pneumatic blenders are equipped with six or 12 wear-resistant aerators mounted around...

    comment
  • Large-Capacity Mixing System

    January 27, 2009

    The Jumbo Quik Mix homogeneously mixes 750 cu ft of palletized material in less than 30 minutes. It was designed to provide a homogeneous mix of large volume dry material batches with its vertical mixing screw and material dispersing paddle. The integrated system includes a Lift & Seal...

    comment
  • Powder Dispersing/Induction Machine

    January 27, 2009

    The MEGATRON MT-VP powder dispersing/induction machine can be used in pilot plant and production environments to efficiently disperse powders, regardless of density, into a flowing liquid. The machine’s advantage is due to the generated strong suction capacity, as unwanted lumps are avoided...

    comment
  • Horizontal Mixer

    January 27, 2009

    This horizontal Ploughshare mixer and jacketed vacuum dryer is easy to clean. The full-access door across the front of the mixer provides for greater access to perform frequent cleaning operations. This design is available on batch or continuous mixers and provides a benefit to manufacturers who...

    comment
  • Fluidized Zone Mixer

    January 27, 2009

    The Bella fluidized zone mixer achieves fast, high-capacity, low-shear, precision mixing of either dry bulk solids or liquids with solids. Regardless of particle size, shape, or density, materials are mixed with a fast, efficient, and gentle action, with typical mixing times 60 seconds or less. A...

    comment
  • Ribbon Blenders

    January 27, 2009

    The unit shown is a 515-cu-ft working capacity model constructed in stainless steel. This blender is driven by a 200-HP drive and includes a jacket for heating or cooling of the product. The blender is also designed for internal pressure operation. Blenders from ½ to 515 cu ft capacities are...

    comment
  • Mixers and Blenders

    January 27, 2009

    Gardner mixers and blenders feature the Easy-Clean cantilever shaft. Available in various designs with a choice of plough, paddle, or interrupted spiral agitator, the large top and end door allow for trouble-free cleaning and inspection. The completely contained mixing media provides a hygienic...

    comment
  • Blender Conveyors

    January 27, 2009

    Stationary and portable CB Series blender conveyors combine bulk carrier unloading, transfer, and blending capabilities in one vacuum-pressure unit. They are sized for 5 to 20-plus TPH and can handle powdered, granular, or pelletized abrasive materials that are friable. Equipped with automated...

    comment
  • Ross Appoints New Vice President

    December 22, 2008

    Bogard Lagman, executive vice president, has announced the promotion of John Paterson to the position of vice president for Ross Mixing Inc., Pt. St. Lucie, Florida.  Paterson joined Ross as product manager – coatings equipment in 1995 and was promoted in 1996 to general manager of...

    comment

Pages