Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mixers & Blenders

  • Process Control Enhances Showroom

    June 14, 2012

    Process Control Corp. has recently spent nearly $125K on new equipment for the showroom at its headquarters in Atlanta. Every type of gravimetric continuous and batch blender is available for demonstrations and testing. The showroom features: • XL6 continuous blender • 5-, 12-, and 25-...

  • The Benefits of Twin-Shaft Mixing

    June 6, 2012

    Everyone has a general idea what mixing means, but describing the mixing process is not so simple. The objective of any mixing process is to distribute and blend the materials with different characteristics, different quantities as evenly as possible resulting in a homogenous mixture. Introducing...

  • Updated Bella XN Double-Shafted Fluidized Zone Mixer

    June 4, 2012

    The Bella XN double-shafted fluidized zone mixer has been updated to include access doors that not only increase accessibility, but also make it easier to clean when necessary. The Bella fluidized zone twin shaft paddle mixer achieves fast, high-capacity, low-shear, precision mixing of either dry...

  • Mixer for Ice Cream

    May 31, 2012

    In the manufacturing process of ice cream, flavors, sugar, or sugar supplements in powder form get added into milk or water and are cooled below the freezing point. These flavors, stabilizers, thickeners, and sweeteners are often a powder mix and created on a high-intensive mixer/blender. Sometimes...

  • Automated Bulk Material Mixing System

    May 30, 2012

    Designed specifically for fully automated introduction, transfer, mixing, and blending of multiple, sluggish materials, this integrated mixing system produces such homogenous blends that downstream production scrap is virtually eliminated. An NBE lift-and-seal gaylord discharge system, with a dust-...

  • Mixers & Blenders with Easy-Clean Cantilever Shaft

    May 29, 2012

    Kemutec offers a full range of Gardner mixers and blenders featuring the Easy-Clean cantilever shaft. The cantilever design agitator shaft eliminates one set of bearings and seals at the non-drive end of the shaft. This, along with the full diameter hinged and safety interlocked door improves...

  • Wet Agglomeration System

    May 25, 2012

    The Schugi Flex-O-Mix is specifically designed to avoid the material buildup that often occurs when forming large particles from fine powders. A continuously deforming mixing chamber keeps wetted particles from adhering to equipment walls. This action prevents clogging and yields a more uniform...

  • Batch Blender

    May 24, 2012

    PCC offers the final addition to its Guardian Series 2 family - the 1-kg batch blender. Featuring cutting edge design and engineering, this all stainless steel blender features easy clean-out and material changes, high accuracy, and is available with up to four elements and up to 350 PPH. Process...

  • ComDisc Mixing System

    May 23, 2012

    ComDisc is a new system that provides a carry out of mixing goods up to 99.997% and more. The lower mixer arm is fitted with one or more wings. During mixing, the system moves into the shadow of the flow and turns to the rear. As the filling level decreases, the ComDisc elements turn in the...

  • All-in-One Mixer/Discharger

    May 22, 2012

    The silo discharger ensures a smooth discharge of dry products, while also mixing the product to ensure a consistent blend. The unloader rotates within the container bottom to prevent non-flowing materials from jamming, bridging, compacting, or segregating often seen by vibration or fluidization...