Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mixers & Blenders

  • Wet Agglomeration System

    May 25, 2012

    The Schugi Flex-O-Mix is specifically designed to avoid the material buildup that often occurs when forming large particles from fine powders. A continuously deforming mixing chamber keeps wetted particles from adhering to equipment walls. This action prevents clogging and yields a more uniform...

    comment
  • Batch Blender

    May 24, 2012

    PCC offers the final addition to its Guardian Series 2 family - the 1-kg batch blender. Featuring cutting edge design and engineering, this all stainless steel blender features easy clean-out and material changes, high accuracy, and is available with up to four elements and up to 350 PPH. Process...

    comment
  • ComDisc Mixing System

    May 23, 2012

    ComDisc is a new system that provides a carry out of mixing goods up to 99.997% and more. The lower mixer arm is fitted with one or more wings. During mixing, the system moves into the shadow of the flow and turns to the rear. As the filling level decreases, the ComDisc elements turn in the...

    comment
  • All-in-One Mixer/Discharger

    May 22, 2012

    The silo discharger ensures a smooth discharge of dry products, while also mixing the product to ensure a consistent blend. The unloader rotates within the container bottom to prevent non-flowing materials from jamming, bridging, compacting, or segregating often seen by vibration or fluidization...

    comment
  • Ross Completes Large High-Speed Disperser Order

    May 21, 2012

    Ross has completed a large order of 51 high-speed dispersers for installation at two facilities of a multinational company. The high-speed dispersers included in the order are suitable for different size batches up to 75 gallons and equipped with 2 to 7.5 HP motors. All are floor-mounted mixers...

    comment
  • Microwave Mixer Heating System

    May 21, 2012

    Marion Mixers has partnered with AMTek Microwave to design and manufacture microwave vessel heating systems for the processing industries. This combination of a microwave and a mixer in one vessel solves a difficult microwave challenge: the ability to achieve uniform heat distribution. Other...

    comment
  • Powder Induction & Dispersion System

    May 18, 2012

    Processors can now add dry ingredients to mix vessels in a more ergonomic fashion, reducing operator injuries. Admix offers a range of products for consistent powder delivery even as viscosity and solids levels increase, insuring that your system will never plug or foul. Deliver powder inline at...

    comment
  • Sanitary Dry Blender

    May 17, 2012

    A recent factory authorization test featured Continental Products Corp’s 400-cu-ft sanitary dry blender, the Rollo-Mixer Mk VIII. Data from the 14,000-lb test batch of powdered drink flavor shows complete uniformity in 5 minutes, while 10- and 15-minute samples showed no variance. ...

    comment
  • Ploughshare Mixer Is Coating Solution for Crispies

    May 16, 2012

    For processing "crispies", a Ploughshare mixer demonstrates that complex coating tasks can be implemented by comparatively cost-effective solutions with precise control of the process parameters. In practical terms this means coating extruded cereal products with chocolate and glaze. The...

    comment
  • ProRate Gravimetric Blender

    May 15, 2012

    The ProRate gravimetric blender handles pellets, regrind, and raw materials. Consisting of one to eight feeders and a central microprocessor-based controller, the ProRate gravimetric blender is designed to continuously meter raw materials accurately into a central station hopper. Each of the...

    comment

Pages