Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Material Handling & Transportation

  • Static Dissipative Urethane Hose Features High Flex Life for Feeding Extruders

    July 23, 2014

    The FlexStat static dissipative polyurethane plastic pellet transfer hose promotes workplace safety and withstands suction cycling when feeding plastic extruders. It is specially formulated with a clear thermoplastic polyurethane that is reinforced with a rigid black external ABS helix and an...

    comment
  • Should My Material Be Tested On-Site?

    July 21, 2014

    In the past, we have discussed flow properties testing and the need for this type work to ensure reliable bin and hopper flow. The Jenike Shear Tester is a device that is recognized as the standard for testing bulk solids by ASTM (D-6128-97) in the U.S. and in Europe, and the test procedure is well...

    comment
  • Integrated Bin Filling Hopper for Tablet Dedusters

    July 15, 2014

    Pharma Technology Inc. introduces an integrated bin filling hopper for its PharmaFlex family of tablet dedusters. The hoppers, which come in sizes of 50 or 100 l, allow for the accumulation of tablets until in-process weight, thickness, and hardness control checks have been completed. These hoppers...

    comment
  • Kansas State, Partners Break Ground on Bulk Solids Innovation Center

    July 15, 2014

    After five years of discussions, planning, and proposals, the Kansas State University Bulk Solids Innovation Center is ready for construction following a groundbreaking ceremony on July 10.   "The Bulk Solids Innovation Center is a prime example of how Kansas State University...

    comment
  • Bulk Bag Filling System with Pallet Dispenser

    July 14, 2014

    The new Material Master Powerfill high-output filling system features a Power-Lift system for powered fill head height adjustment and an Easy-Load rotary bag hanger system. These features bring the fill head and bag strap connection points to an ergonomic position directly in front of the operator...

    comment
  • Conveyor Equipment Orders Increase 9.1%

    July 10, 2014

    The Conveyor Equipment Manufacturers Association (CEMA) reports that its May 2014 booked orders increased 9.1% when compared to May 2013 orders and 1.1% when compared to April 2014 booked orders. May booked orders were up 1.3% for Bulk Handling Equipment and up 1.2% for Unit Handling Equipment...

    comment
  • Grain Drying, Safety Management, Material Handling Courses

    July 8, 2014

    Registration is open for three courses from the Grain Elevator and Processing Society (GEAPS) and Kansas State University Distance Education Program. GEAPS 524: Grain Drying, GEAPS 540: Safety Management for Grain Facilities and GEAPS 552: Materials Handling III run September 2-October 3....

    comment
  • Bulk Solids Innovation Center Groundbreaking Set

    July 8, 2014

    A groundbreaking for the Kansas State University Bulk Solids Innovation Center will be at 9:30 a.m. Thursday, July 10, in the 600 block of North Front St. in Salina, KS. The public is welcome to attend.   The center is the project of Kansas State University with partners the Salina Area...

    comment
  • Martin Engineering Co-Sponsors Fund Raiser for Orphanage

    July 1, 2014

    Martin Engineering, a global leader in bulk material handling technology, has co-sponsored the 4th annual fund-raiser to support the children of Casa Hogar de Cabo San Lucas, an orphanage dedicated to providing active care and personal well-being for boys in need in Baja California Sur....

    comment
  • Building Materials Manufacturer Relies on Stretch Hood Technology

    June 30, 2014

    With its headquarters in Paderborn, located in the eastern half of North Rhine-Westphalia region of Germany, August Lücking GmbH & Co.KG is one of the leading producers of building materials in the country. In order to pack clay bricks – or backing bricks – efficiently, the...

    comment

Pages