Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Feeders

  • Hapman Recognizes Top Rep

    September 27, 2012

    Bill Payne of BHE Inc., located in Ludington, MI, received his third consecutive Hapman Representative of the Year Award. Presented by Hapman national sales manager Jim Hughes, the award recognizes Payne as an exceptional Hapman team player who goes above and beyond for his customers by...

    comment
  • Fluidized Tube Feeder

    September 27, 2012

    The fluidized tube feeder is used for transporting free flowing materials a relatively short distance, and is primarily used to transfer material from a surge bin into a scaling or weighing operation. Material is conveyed using a series of fluidizing nozzles and pneumatic vibration devices. The...

    comment
  • Bulk Container Crusher/Feeder

    September 27, 2012

    This combination crusher/feeder was designed to solve the nuisance of lumps coming from bulk containers while providing a metered feed to the downstream equipment. This solution is applicable to many applications for industries like chemical, food, dairy, or any dry to slightly moist powders. The...

    comment
  • AccuFeed Modular Feeder

    September 26, 2012

    The AccuFeed uses molded composite components and a modular design to reduce cost and delivery time. Available in capacities up to 600 ft/hr, the patented AccuFeed employs controlled vibration to achieve volumetric accuracies of ± 1-2%. The machines disassemble quickly for cleaning and meet...

    comment
  • Better-Weigh Continuous Weigh Feeders

    September 25, 2012

    Better-Weigh continuous feeders are ideal for gravimetric feeding of dry bulk materials where it is necessary to determine actual feed rates on a loss-of-weight basis. Available in seven models with feed rates from 1 to 550 cu ft/hr (larger sizes available), these feeders are designed to provide...

    comment
  • Screw Conveyors for Cement and Filler

    September 24, 2012

    These screw feeders offer compact drives with built-in bearings and flanged-mounted standard motors. The benefits of this configuration are reduced footprint, perfect shaft centring, and a smaller number of parts subject to wear and tear. Another important design feature is the ball jointed,...

    comment
  • Kraus Stedi-Flo Rotating Vibratory Feeder

    September 24, 2012

    The Kraus Stedi-Flo two-mass vibratory feeder is used as a charge feeder to feed raw materials like metal scrap into two separate melting furnaces. This highly efficient two-mass design can easily pivot from furnace to furnace as required upon demand, using a special gear operating base. Also...

    comment
  • Model BDF Volumetric Feeder

    September 21, 2012

    The Model BDF-1.5-2 high-performance volumetric feeder incorporates two independently driven metering augers with a dual agitator flow-inducing mechanism to provide versatile metering and hoppering capabilities over a wide feed range. Suitable for both continuous or batching applications, the Model...

    comment
  • Weigh Screw Feeder

    September 19, 2012

    Continuous flow measurement is accomplished with a cantilevered screw feeder with pivot centered under the in-feed of the feeder with the feeder suspended from a load cell hung from the discharge end. Flow rates range from 7-170 cu m/hr with a turndown ratio of 5:1. Accuracy rate is +/-1% full...

    comment
  • RT 7000 High-Speed Net-Weigh Feeder

    September 18, 2012

    The RT 7000 is a premium, net-weigh feeder with exact weighments, high production capacity and operator features in one package. A gravity-fed, primary fill cycle is complimented by a vibratory-fed, secondary cycle to provide the fastest possible rates and precise accuracy when packaging free-...

    comment

Pages