Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Drying & Thermal Solids Processing

  • Insight into the Aseptic Spray Drying Process

    December 17, 2014

    Having just gone through the design and Factory Acceptance Test (FAT) of some new spray drying systems, I noted the complexity of design required. While there are thousands of spray dryers in use, supplied by many different vendors, building a truly aseptic plant presents some major challenges...

    comment
  • New Cooler Technology Solves Salt Production Problem

    December 17, 2014

    Carrier Vibrating Equipment Inc. was recently approached by a major U.S.-based producer of fine salt to help resolve a problem they had been experiencing. The approach used for the production of salt at this facility uses gas-fired evaporators to generate a salt wet cake from a brine solution....

    comment
  • Drying/Mixing Interactive Design Tool

    December 16, 2014

    Littleford’s Interactive Design Tool (IDT) allows the customer to create their own custom mixing, drying, or evaporation system in minutes with a life-size downloadable model in any CAD package of their choosing. Currently it can handle standard sizes ranging from 5 to 8000 l. IN the future,...

    comment
  • Laboratory Flash Drying System

    December 15, 2014

    Fluid Energy has developed a solution for laboratory and small scale pilot flash drying trials. The company has mounted a Model 2 ThermaJet flash drying system on a portable table, complete with controls, feeding and collection equipment. All components are quick breakapart construction allowing...

    comment
  • RF Drying System for Temperature-Sensitive Materials

    December 15, 2014

    This new Radio Frequency (RF) drying system is used for rapidly drying temperature sensitive materials such as filter cake and granular or pelletized materials. This system uses RF energy to uniformly heat a bed depth of conveyorized material and rapidly remove the water without overheating,...

    comment
  • Fluid Bed Dryer Airslide Inlet Tray Prevents Blockage

    December 9, 2014

    This new airslide inlet tray prevents sticky materials from clumping at the entry of vibrating fluid bed dryers and coolers. Installed within the infeed section where material enters the drying system, the airslide inlet tray directs the heated airstream through a series of small openings in the...

    comment
  • Free Webinar on Solving Moisture Problems in Powders

    December 3, 2014

    On December 10, 2014 at 11am ET, Brady Carter, Decagon Devices research scientist, will present a free webinar, Solving Moisture Problems in Powders. Carter will educate attendees on how to avoid caking, stickiness, reduced flow, crystallization, and other moisture-related problems in powders...

    comment
  • Fluid Bed Dryers Made Shorter

    November 12, 2014

    By Craig Anderson, MBA, and Jarrett Bowling, Almo Process, and Michael Pfeiffer and Dr. – Ing. Mathias Trojosky, Allgaier Process Technology GmbH With integrated heat exchangers in a fluid bed dryer, the combination of conductive heat transfer from fluidization with additional indirect heat...

    comment
  • Vacuum Paddle Dryer Features Short Drying Times

    October 28, 2014

    The Pharmadry is a vacuum paddle dryer with short drying times and well suited for the drying of freely flowing, sensitive pharmaceutical ingredients and fine chemicals. It is designed to meet stringent cGMP and FDA guidelines. The agitator is supported at the rear, with externally exchangeable...

    comment
  • Drying Theory Seminar Announced

    October 27, 2014

    Bühler Aeroglide, a global leader in thermal process engineering and technology for food, feed, and industrial materials, will hold a drying seminar in Cary, NC, on December 9-11, 2014. The seminar aims to help participants learn and apply drying theory to enhance the performance of processing...

    comment

Pages