Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Mechanical Conveying

  • LED Bulb for Safety Stop Control

    January 20, 2015

    The Model RS-2L pull cord is a rugged safety stop control that provides a quick positive shut off of dangerous equipment in emergencies or normal operation. It is actuated by a cable pulled by endangered personnel. The outputs of the Model RS-2L can control up to four separate circuits, depending...

    comment
  • Cleveland Cascades Ltd

    comment
  • 4B Components Promotes Knapp to VP

    January 14, 2015

    4B Components Ltd, a worldwide manufacturer of material handling and electronic components for bucket elevators and conveyors, has promoted Brian Knapp to the position of vice president with responsibility for technical sales and service for the Electronics Div. “Brian has done a...

    comment
  • Bucket Elevators Used for Superphosphate Conveying

    January 14, 2015

    Guttridge Ltd has supplied Bradley Pulverizer Co., a leading provider of minerals processing plant, with a series of bucket elevators for single superphosphate powder (SSP) plant projects in the Middle East. The new plants incorporate the Bradley Broadfield process, the accepted global...

    comment
  • Slider Cradles Reduce Conveyor Spillage, Belt Wear

    January 13, 2015

    The EVO slider cradle and the Martin slider cradle are designed to mitigate expensive spillage and belt wear issues at material transfer points. Both support the belt and prevent spillage due to belt edge sag.  Located under the skirt board in the chute box after the impact cradle, the units...

    comment
  • Conveyor Equipment Orders up 18%

    January 9, 2015

    The Conveyor Equipment Manufacturers Association (CEMA) reported that its November 2014 booked orders increased 17.7% when compared to November 2013 orders. When compared to October 2014 booked orders, November 2014 booked orders were down 21.6%. November booked orders were down 20.1% for...

    comment
  • PALAMATIC PROCESS

    comment
  • Advantages of Pneumatic Conveyors vs. Mechanical

    December 10, 2014

    Two primary methods for transferring bulk materials are by pneumatic and mechanical conveyors. When making choices in bulk material handling, there are a number of considerations to address in order to select an optimal convey method for handling a specific material for a unique application....

    comment
  • Conveyor Equipment Orders Increase 59%

    December 10, 2014

    The Conveyor Equipment Manufacturers Association (CEMA) reported that its October 2014 booked orders increased 16.1% when compared to October 2013 orders and 59.5% when compared to September 2014. October booked orders were up 14.3% for Bulk Handling Equipment and up 101.6% for Unit Handling...

    comment
  • Custom Work Cell Molds Conveyor Belt Cleaners

    December 8, 2014

    In a move designed to deliver global product availability and consistency with the fastest possible response to customer orders, Martin Engineering has announced the design and manufacture of a custom molding cell for its polyurethane conveyor belt cleaners.   By mixing, forming, and...

    comment

Pages