The C-20 is a new DeDuster developed specifically for injection molding processes. Removing dust and streamers prevents the creation of black or weak spots in finished products and results in reduced scrap rates, higher quality parts, and improved profit. The lightweight C-20 DeDuster weighs 20 lb and requires only 9.5 in. for installation between the hopper loader and inlet hopper of an injection molding machine. The high cleaning efficiency offers results comparable to the P1 DeDuster. It features stainless steel construction, 110 or 220V operation, and only consumes 2-3CFM (3.4-5 cu m/hr) compressed air at 20-30 psi pressure. The C-20 DeDuster is designed for a nominal product flow rate of 50 lb/hr at 30 lb/cu ft bulk density. Flow rates up to 70 lb/hr are possible for products with higher bulk densities. The design of the C-20 builds upon the features of the proven mini-DeDuster series. The product inlet has an integrated agitator to reduce “bridging” and the Venturi design maximizes dust removal performance and minimizes carryover of good product into the dust collector. It operates with compressed air supplied directly from the plant air supply instead of from a separate fan. Inside the unit, the compressed air is split into two air streams for optimal removal of dust and streamers, and an ionizer is used to release the electrostatic bond between the pellets and the dust. The cleaning air blows the removed fines and streamers into two mini-cyclones, which separate them from the air. The separated contaminants are collected in a clear dust collection box and the cleaned air is filtered and released to the atmosphere. For creation of a negative pressure in the entire device, outside air is pulled in through a filter-protected opening.
Pelletron Corp., Lancaster, PA 717-293-4008 www.pelletroncorp.com
For related equipment reviews, articles, and news, visit our Dust Collection & Air Pollution Control Equipment Zone
Click here for information about the upcoming Powder & Bulk Solids Texas