Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Filter Receiver

January 4, 2012
The Filtair series filter receiver provides automatic material-from-air separation. The tangential inlet located in the receiver’s circular hopper provides a cyclonic separation of the material from the air stream. Remaining airborne material is trapped by the filter element. Timed, compressed air pulses clean the filter bags or cartridges dropping the once airborne material into the hopper. Only a single row of the filter element is pulsed at a time, leaving the remaining filter element on-line. The filter element is protected from the material mainstream by a deflector shield. Efficient performance of the filter receiver is achieved through the proper selection of filter media and the correct air-to-cloth ratio. The unit has a quick-access door where the filter element is easily accessed for service and comes with an enclosed solid state timer control panel. Materials of construction include carbon or stainless steel.
K-Tron, Salina, KS 785-825-1611
www.ktron.com