Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Clean Sweep Vacuum Accessory

December 3, 2013
click here to view full image

The new Clean Sweep pneumatic vacuum accessory from Camfil Air Pollution Control provides an economical clean-up solution by adding a high-vacuum wand to a low-vacuum dust collector such as the Farr Gold Series cartridge collector. The Clean Sweep unit removes fugitive dust from around the dust collector and adjacent work area and sends it directly to the collector. The Clean Sweep uses a pneumatic vacuum pump that draws the dust into the collector through a vacuum hose system. The pump is powered by the same compressed air line that cleans the dust collector filters, so no extra electricity is required. It will create a vacuum of up to 40 in. w.g. at 90 psig compressed air. Dust enters the collector inlet before the channel baffles so that large particles will not contact the filter media. Shut-off valves ensure that the Clean Sweep system is isolated from the collector when not in use and that the vacuum pump delivers compressed air only when the system is in operation.   
Camfil APC, Jonesboro, AR 800-479-6801 www.camfilapc.com

For related equipment reviews, articles, and news, visit our Dust Collection & Air Pollution Control Equipment Zone

Click here for information about International Powder & Bulk Solids Conference & Exhibition

 

Camfil Air Pollution Control