Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Schenck Process Launches Apron Weigh Feeder

September 27, 2017
Schenck Process Multidos VDP-C weigh feeder
Schenck Process Multidos VDP-C weigh feeder

Schenck Process has announced the latest extension to its Multidos weigh feeder range. Multidos VDP-C is a new range of medium-sized and compact apron weigh feeders mainly suitable for raw material feeding, hot clinker feeding and similar applications.

“Multidos VDP-C leverages the proven technical features and component reliability of the existing Multidos weigh- and apron feeder designs, while addressing specific application scenarios. In particular, it offers a perfect solution wherever a regular rubber belt weigh feeder would otherwise be chosen but cannot be installed because of the physical, chemical, and performance limits of a rubber belt,” said Peter Groll, managing director construction & energy, Schenck Process EMEA. “Moreover, because we have taken a ‘designed straight for the job’ approach, the cost is significantly lower than competitor apron weigh feeders.”

With a completely enclosed design the Multidos VDP-C enables a cleaner installation environment, with no extra cost, while also allowing quick access for inspection by means of easy-to-remove covers. Alternatively, an open design is possible for permanently visible material feed. The kit structure of Multidos VDP-C enables installation in a total of 48 possible geometrical configurations to suit plant requirements. It can be installed on the ground or suspended under a bin.

“Extremely high performance, component robustness, safety, and the low cost of installation make this apron feeder stand out from the competition,” said Groll. “It is also very compact. Multidos VDP-C has the lowest installation profile of any apron feeder on the market, and it is the shortest apron weigh feeder that is available with an integrated weighing section.”

The chain used on the Multidos VDP-C is an enhanced version that can easily tolerate a drive torque four times higher than required. In addition, apron pans accept loads up to six times higher than the nominal load, for maximum robustness. So there are no compromises that need to be made when it comes to durability and reliability. Apron pans are available for fine grain material, and alternative designs for sticky and coarse material. The coarse material apron pans are made of Hardox steel for maximum strength and service life.

Schenck Process LLC, Kansas City, MO 816-891-9300 www.schenckprocess.com

For related articles, news, and equipment reviews, visit our Feeders Equipment Zone

Click here for a List of Feeder Manufacturers

 

Schenck Process